High accuracy, the perpendicular adjustment to the barrel’s axis, makes it suitable to various guns.
It is adjustable for 3” (76,2 mm) in elevation and it has windage adjustment.
Distance between the two mounting holes: 1 3/4” about (45,30 mm).

Creedmoor sight, adjustable for elevation and with a little windage adjustment in the eye piece.
Distance between the two mounting holes: 1 7/16” up to 1 9/16” (37,7 up to 39,6 mm).

USA436 - Long Creedmoor, 4" Staff.
USA433 - Short Creedmoor, 2" Staff.

Adjustable tang sight for both elevation and windage.
Can be mounted on different rifles models
On the base, the holes distance makes it universal.
The holes distance is from 1 7/8” to 2 1/4” (47,7 to 57,4 mm)

Adjustable tang sight with rounded or squared base complete with mounting support.
Elevation is determined by the fixing screw at the base with further elevation possible by the eye piece sliding.
Windage is on the eyepiece.

USA442 - Squared base, Mortimer Creedmoor
USA468 - Rounded Base, Target Creedmoor
USA443 - Rounded base, elevation on the base only

This Hadley style eyepiece is interchangeable on Creedmoor sights
USA430, 431, 461, 430, 465, 404, 405, 406, 407 and 446.
With 8 viewing holes of different diameters:-
.012", .020", .031", .039", .051", .063", .078", .086"
( .3, .5, .8, 1, 1.3, 1.6, 2, 2.2 mm) placed on a rotating disk, which can be selected without disassembling or loosing the eye piece, following the available light.
The eye piece has a rubber ring to avoid any inconveniences due to recoil

The Dr Goodwin Creedmoor Sight is a high precision sight with cylindrical staff off center to the axis of the barrel.
It was popular with long range target shooters in the late 1800’s.
Thanks to its “flag” position, the eye piece slide enables a very wide windage adjustment with a movement of 1.26” (32 mm), particularly useful in strong wind conditions.
The elevation adjustment has a movement of 2.85” (72 mm)
The structural features of the Goodwin Creedmoor sight offers the advantage to reach the rifle chamber with any cleaning device and to inspect the barrel between the shots.
The sight base has a “tilt” screw which allows the staff to be set perfectly vertical at all elevations.
Distance between the two mounting holes: 2 3/16” up to 2 5/16” (56 up to 58,2 mm)
Available also for the Gibbs Rifle.

USA407 - Goodwin Creedmoor Sight
USA407A - Goodwin Creedmoor Sight for the Gibbs Rifle

Long Creedmoor sight adjustable for elevation
Distance between the two mounting holes:
17/16” up to 2” (37,7 up to 54,4 mm).

Short Creedmoor sight, adjustable for elevation.
Distance between the two mounting holes:
1 7/16” up to 1 9/16” (37,7 up to 39,6 mm).

USA445 - Short Creedmoor, 2" Staff.
USA454 - Long Creedmoor, 4" Staff.

Priced from $150 as reflected in your cart